| FASTENER LENGTH | 0.800 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| HEAD HEIGHT | 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 130000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.164 INCHES |
| POINT DIAMETER | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| POINT LENGTH | 0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| POINT STYLE | DOG |
| SPECIAL FEATURES | UNTHREADED SHANK UNDERCUTTO 0.115 IN. MIN,0.125 IN. MAX DIA |
| WIDTH ACROSS FLATS | 0.140 INCHES MINIMUM AND 0.142 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| THREAD LENGTH | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNC |