|
|
|
National Stock Number:
5305-00-143-1709
Federal Supply Class:
5305
National Item Identification Number:
001431709
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 2-101-133-01 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| FASTENER LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | HARDNESS RATING | 62.5 ROCKWELL B MINIMUM AND 69.0 ROCKWELL C MAXIMUM | | HEAD HEIGHT | 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | | HEAD HOLE CONFIGURATION STYLE | HEXAGON CORNERS | | HEAD STYLE | HEXAGON | | HOLE DIAMETER | 0.038 INCHES NOMINAL | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MINIMUM TENSILE STRENGTH | 130000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MS5735 ASSN STD SINGLE MATERIAL RESPONSE | | SCREW MATERIAL | STEEL | | SPECIAL FEATURES | MAJOR DIA OF THD MODIFIED 0.1620 IN. MIN,0.1640 IN. MAX,0.062 DIA HOLE DRILLED THRU LONGITUDINAL AXIS OF HEAD 0.080 IN. DEEP | | WIDTH BETWEEN FLATS | 0.276 INCHES MINIMUM AND 0.282 INCHES MAXIMUM | | TEST DATA DOCUMENT | +6808-P-191547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.150 INCHES MINIMUM AND 0.180 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 36 | | THREAD SERIES DESIGNATOR | UNF |
|
|