|
|
|
National Stock Number:
5305-00-143-0449
Federal Supply Class:
5305
National Item Identification Number:
001430449
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 3MA1505-4 | 73197 | HI-SHEAR CORPORATION | | 3MA1505-4 | 76301 | THE BOEING COMPANY | | 3MA1505-4 | 80539 | SPS TECHNOLOGIES, LLC | | 3MA1505-4 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 3MA1505-4 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | 3MFR1505-4 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | HEAD DIAMETER | 0.578 INCHES MINIMUM AND 0.633 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.938 INCHES | | SPECIAL FEATURES | PRIMER APPLIED TO SCREW PER FSCM 76301,PROCESS SPEC P. S. 13421 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.292 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|