| FASTENER LENGTH | 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| HARDNESS RATING | 80.0 ROCKWELL B MINIMUM OVERALL |
| HEAD DIAMETER | 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| HEAD HEIGHT | 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| HOLE DIAMETER | 0.033 INCHES MINIMUM AND 0.039 INCHES MAXIMUM |
| HOLE TYPE | DRILLED |
| HOLE QUANTITY | 2 |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.112 INCHES |
| SPECIFICATION/STANDARD DATA | 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| WIDTH ACROSS FLATS | 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.295 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 40 |
| THREAD SERIES DESIGNATOR | UNRC |