5305-00-139-7008 SCREW,EXTERNALLY RELIEVED BODY Index 5305-00-139-7010 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-139-7009

Federal Supply Class:
5305

National Item Identification Number:
001397009

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.


Manufacturer Information:
5305001397009A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5305001397009SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SMC413884-480063US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR


Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY1
FASTENER LENGTH0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM
HEAD DIAMETER0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLEFILLISTER
INTERNAL DRIVE STYLESLOT
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A633 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM A545 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A546 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A547 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A549 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
NOMINAL THREAD DIAMETER0.138 INCHES
SPECIAL FEATURESCOLOR GOLD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD LENGTH0.214 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH32


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us