|
|
|
National Stock Number:
5305-00-137-3270
Federal Supply Class:
5305
National Item Identification Number:
001373270
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| S010-004-0810 | 07421 | L3HARRIS INTERSTATE ELECTRONICS CORPORATION | | SFR8-32NC2A5-8 | 97539 | APM HEXSEAL CORP |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | HEAD DIAMETER | 0.300 INCHES MINIMUM AND 0.332 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE | | SCREW MATERIAL | STEEL CORROSION RESISTING OR STEEL | | SPECIAL FEATURES | FURNISH ONE SILICONE RUBBER O RING,BEARING SURFACE OF HEAD UNDERCUT FOR O RING | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.470 INCHES MINIMUM AND 0.553 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC |
|
|