| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAT |
| MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | ANGLE RELIEF VALVE |
| PROPRIETARY CHARACTERISTICS | PACS |
| MEDIA FOR WHICH DESIGNED | WATER, SALT SINGLE RESPONSE |
| NONDEFINITIVE SPEC/STD DATA | B GRADE |
| OPENING PRESSURE SETTING | 100.0 POUNDS PER SQUARE INCH |
| RENEWABLE SEAT RING TYPE | PRESSED-IN |
| SECOND CONNECTION FACE TO CENTERLINE DISTANCE | 6.500 INCHES |
| SPECIFICATION/STANDARD DATA | 81349 - MIL-V-24322 GOVERNMENT SPECIFICATION |
| SPECIAL FEATURES | SUPPLIED WITH MONEL STEM AND SPRING AND GAGGING DEVICE; FLANGES IAW MIL-F-20042 150 LB. RATING, SET PRESSURE 100 PSIG, ACCUMULATION 120 PSIG, BLOWDOWN 80 PSIG, RAGED CAPACITY 1,588 GPM, REQUIRED CAPACITY 840 GPM, SPRING RANGE 75/110 PSIG, INLET LOSS 20 PSIG, BACKPRESSURE 10 PSIG |
| VALVE OPERATION METHOD | AUTOMATIC OR MANUAL |
| VALVE SIZE | 4.000 INCHES |
| VALVE DISCHARGE FLOW RATE | 840.0 GALLONS PER MINUTE |
| STYLE DESIGNATOR | ANGLE FLANGED ENDS |
| TEST DATA DOCUMENT | 81349-0.81349-0IL-S-901C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MIL-STD-167-1 FOR MEDIUM WEIGHT, GR A, CL I0.96906-MIL-STD-167-1 FOR MEDIUM WEIGHT, GR A, CL I0FIXTURE 4C STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| DISK LOADING METHOD | SPRING |
| BONNET ATTACHMENT METHOD | BOLTED |
| BONNET TYPE | INSIDE SPRING |
| CONNECTION TYPE | FLANGE ALL ENDS |
| DEPARTURE FROM CITED DOCUMENT | DOUBLE O-RING SEAL INSTEAD OF A STUFFING BOX |
| FURNISHED ITEMS AND QUANTITY | 1 LEVER |
| FIRST CONNECTION FACE TO CENTERLINE DISTANCE | 6.500 INCHES |
| FLANGE SHAPE | ROUND WITH HOLES ALL ENDS |
| FLOW CONTROL DEVICE | DISK |
| MATERIAL | BRONZE BODY |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE FLOW CONTROL DEVICE |