| CONNECTION TYPE | UNTHREADED INTERNAL PIPE ALL ENDS |
| CONNECTION STYLE | GASKET SEAL (PIPE) ALL ENDS |
| FURNISHED ITEMS AND QUANTITY | 1 LEVER AND 2 TAILPIECE AND 2 NUT |
| FEATURES PROVIDED | PRESSURE TIGHT OUTLET SIDE |
| FLOW CONTROL DEVICE | DISK |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS3660 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B61 ASSN STD SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | COPPER ALLOY BODY |
| MATERIAL | NICKEL ALLOY SEAT |
| MATERIAL | NICKEL ALLOY STEM |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE FLOW CONTROL DEVICE |
| DISK LOADING METHOD | SPRING |
| ADJUSTABLE PRESSURE RANGE | +110.0/+160.0 POUNDS PER SQUARE INCH |
| BONNET TYPE | INSIDE SCREW |
| BONNET ATTACHMENT METHOD | UNION |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | VALVE, ANGLE RELIEF, D2000FF FORMERLY D50UU |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING TEMP | 200.0 DEG FAHRENHEIT 1ST RESPONSE |
| MAXIMUM OPERATING TEMP | 425.0 DEG FAHRENHEIT 2ND RESPONSE |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH 2ND RESPONSE |
| MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | LIQUID SINGLE RESPONSE |
| NOMINAL PIPE SIZE ACCOMMODATED | 2.000 INCHES ALL ENDS |
| NONDEFINITIVE SPEC/STD DATA | B GRADE |
| RENEWABLE SEAT RING TYPE | THREADED |
| SPECIFICATION/STANDARD DATA | 81379-MIL-V-24332 GOVERNMENT SPECIFICATION |
| VALVE OPERATION METHOD | AUTOMATIC OR MANUAL |
| STYLE DESIGNATOR | ANGLE |
| TEST DATA DOCUMENT | 81349-MIL-S-901C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MIL-STD-167-1 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |