|
|
|
National Stock Number:
4820-01-060-7534
Federal Supply Class:
4820
National Item Identification Number:
010607534
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 877782 | 0KDP7 | KIDDE-FENWAL, INC. |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END | | CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE(TUBE) 2ND END | | FLOW CONTROL DEVICE | PISTON | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-423,COM+303 FED SPEC SINGLE MATERIAL RESPONSE STEM | | MATERIAL | COPPER ALLOY BODY | | MATERIAL | COPPER ALLOY FLOW CONTROL DEVICE | | MATERIAL | STEEL STEM | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.750 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.500 INCHES 1ST END | | NOMINAL THREAD SIZE | 1.250 INCHES 2ND END | | SEAT ANGLE | 12.0 DEGREES 2ND END | | SEAT ANGLE | 45.0 DEGREES 1ST END | | VALVE OPERATION METHOD | MANUAL | | STYLE DESIGNATOR | ANGLE | | THREAD CLASS | 3A 1ST END | | THREAD CLASS | 3B 2ND END | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | UNEF 2ND END | | THREAD SERIES DESIGNATOR | UNJF 1ST END |
|
|