|
|
|
National Stock Number:
4820-01-028-4478
Federal Supply Class:
4820
National Item Identification Number:
010284478
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 11842 | 91161 | ELECTRO IMPULSE LABORATORY INC | | 11842B | 91161 | ELECTRO IMPULSE LABORATORY INC | | C11842B | 91161 | ELECTRO IMPULSE LABORATORY INC |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | PLAIN (TUBE) 2ND END | | CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE(TUBE) 1ST END | | FLOW CONTROL DEVICE | DISK | | MATERIAL | STEEL OVERALL | | MAXIMUM OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.000 INCHES 1ST END | | NOMINAL THREAD SIZE | 1.500 INCHES 2ND END | | NOMINAL THREAD SIZE | 1.500 INCHES 1ST END | | SEAT ANGLE | 45.0 DEGREES 1ST END | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD CLASS | 2A 2ND END | | THREAD CLASS | 2B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD SERIES DESIGNATOR | UNS 1ST END | | THREAD SERIES DESIGNATOR | UNS 2ND END | | THREAD QUANTITY PER INCH | 14 1ST END | | THREAD QUANTITY PER INCH | 14 2ND END | | VALVE OPERATION METHOD | MANUAL |
|
|