5935-01-017-1199 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5915-01-017-1201 FILTER,BAND PASS

National Stock Number:
4820-01-017-1200

Federal Supply Class:
4820

National Item Identification Number:
010171200

Description:
VALVE,STOP-CHECK

Detail:
A VALVE WITH A BOLT OR STEM THAT MAY BE MECHANICALLY ACTUATED TO TWO DIFFERENT POSITIONS BY ROTARY OR LINEAR MOTION. IN THE FIRST POSITION, THE VALVE DISK IS LOCATED AND LOCKED AGAINST THE SEAT PERMITTING NO FLUID FLOW THROUGH THE VALVE. IN THE SECOND POSITION, ONE SIDE OF THE VALVE DISK IS LOCATED AGAINST THE SEAT PERMITTING MOVEMENT OF THE DISK IN A MANNER THAT WILL ALLOW A FLOW OF FLUID IN ONE DIRECTION THROUGH THE VALVE. THE VALVE DISK MAY BE SPRING LOADED. IT MAY BE INLINE OR CARTRIDGE (MANIFOLD) DESIGN. SEE ALSO VALVE (1), LIFT-CHECK AND VALVE (1), STOP-LIFT-CHECK.


Manufacturer Information:
B911013-ASSY0FEA5QUALITY ASSURED PRODUCTS INC DBA QA PRODUCTS INC
CS4820-010216236DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)
CS4820-0102 TYPE V1116236DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)
D182917062P J VALVES INC
D1829-1 1-2IN G17062P J VALVES INC
D1829-1 1-2INGL17062P J VALVES INC
D1829-1 1-2INGLBSTP CHK17062P J VALVES INC
DOD-V-2467581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILV17737 TYPE81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BOLT HOLE NOMINAL DIAMETER1.125 INCHES ALL ENDS
BOLT HOLE QUANTITY4 ALL ENDS
BONNET ATTACHMENT METHODBOLTED
BONNET TYPEOUTSIDE SCREW-YOKE
BOLT CIRCLE NOMINAL DIAMETER4.875 INCHES ALL ENDS
CONNECTION TYPEFLANGE ALL ENDS
FACE TO FACE DISTANCE12.000 INCHES
FEATURES PROVIDEDBONNET PACKING
FLANGE FACE DESIGNRAISED STRAIGHT ALL ENDS
FLANGE SHAPEROUND WITH HOLES ALL ENDS
FLOW CONTROL DEVICEDISK
MATERIALCOBALT ALLOY SEAT
MATERIALNICKEL ALLOY OR COBALT ALLOY FLOW CONTROL DEVICE
MATERIALNICKEL ALLOY BODY
MATERIALNICKEL ALLOY STEM
MAXIMUM OPERATING PRESSURE1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MEDIA FOR WHICH DESIGNEDSTEAM SINGLE RESPONSE
MOUNTING POSITIONHORIZONTAL
NOMINAL OUTSIDE DIAMETER7.000 INCHES ALL ENDS
NOMINAL THICKNESS1.250 INCHES ALL ENDS
NONDEFINITIVE SPEC/STD DATAVII TYPE
RAISED FACE NOMINAL DIAMETER2.875 INCHES 1ST END
RAISED FACE NOMINAL HEIGHT0.250 INCHES ALL ENDS
VALVE OPERATION METHODMANUAL
SPECIFICATION/STANDARD DATA81349-DOD-V-24675 GOVERNMENT SPECIFICATION
STYLE DESIGNATORSTRAIGHT THRU


Click here to Register for Free 30-day Trial