|
|
|
National Stock Number:
4820-01-013-1465
Federal Supply Class:
4820
National Item Identification Number:
010131465
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| F536A | 28193 | HENRY TECHNOLOGIES, INC. |
|
Techincal Specification:
| BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | INTEGRAL | | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | CONNECTION STYLE | PLAIN (PIPE) 2ND END | | FURNISHED ITEMS AND QUANTITY | 1 CAP AND 1 CHAIN | | FEATURES PROVIDED | BONNET PACKING | | FLOW CONTROL DEVICE | DISK OR STEM | | MATERIAL | COPPER ALLOY BODY | | MATERIAL | COPPER ALLOY SEAT | | MATERIAL | STEEL FLOW CONTROL DEVICE | | MAXIMUM OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 300.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 1ST END | | NOMINAL PIPE SIZE ACCOMMODATED | 0.250 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.250 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END | | SEAT ANGLE | 45.0 DEGREES 1ST END | | STYLE DESIGNATOR | ANGLE | | THREAD CLASS | 3A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD SERIES DESIGNATOR | NPT 2ND END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | VALVE OPERATION METHOD | MANUAL |
|
|