| CONNECTION STYLE | FLARED (TUBE) 2ND END |
| CONNECTION STYLE | GASKET SEAL(BOSS) 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| DISK LOADING METHOD | SPRING |
| FEATURES PROVIDED | PRESSURE TIGHT OUTLET SIDE |
| FLOW CONTROL DEVICE | POPPET |
| OPENING PRESSURE SETTING | 975.0 POUNDS PER SQUARE INCH |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC 1ST MATERIAL RESPONSE FLOW CONTROL DEVICE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE SEAT |
| MATERIAL | ALUMINUM ALLOY 2024 AND PLASTIC POLYTETRAFLUOROETHYLENE FLOW CONTROL DEVICE |
| MATERIAL | ALUMINUM ALLOY 2024 BODY |
| MATERIAL | ALUMINUM ALLOY 2024 SEAT |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | 300.0 FAHRENHEIT SINGLE RESPONSE |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.437 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SEAT ANGLE | 60.0 DEGREES 1ST END |
| SPECIAL FEATURES | MEDIA FOR PRESSURE/TEMP IS CHEMICALLY INERT FLUIDS |
| VALVE OPERATION METHOD | AUTOMATIC |
| SURFACE TREATMENT | ANODIZE PLATE |
| THREAD CLASS | 3A 2ND END |
| THREAD CLASS | 3A 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD QUANTITY PER INCH | 20 2ND END |