| CONNECTION STYLE | FLARED (TUBE) 1ST END |
| CONNECTION STYLE | GASKET SEAL (BOSS) 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL BOSS 2ND END |
| DISK LOADING METHOD | SPRING |
| FLOW CONTROL DEVICE | POPPET |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | ALUMINUM ALLOY 2024 BODY |
| MAXIMUM OPERATING PRESSURE | 600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | -65.0 FAHRENHEIT 1ST RESPONSE |
| MAXIMUM OPERATING TEMP | 600.0 FAHRENHEIT 2ND RESPONSE |
| MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | ALCOHOL, ETHYL 5TH RESPONSE |
| MEDIA FOR WHICH DESIGNED | CARBON DIOXIDE 3RD RESPONSE |
| MEDIA FOR WHICH DESIGNED | ETHYLENE GLYCOL 4TH RESPONSE |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON 2ND RESPONSE |
| MOUNTING POSITION | HORIZONTAL |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.437 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.437 INCHES 2ND END |
| RENEWABLE SEAT RING TYPE | PRESSED-IN |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| VALVE OPERATION METHOD | AUTOMATIC |
| STYLE DESIGNATOR | STRAIGHT THRU |
| SURFACE TREATMENT | ANODIZE |
| THREAD CLASS | 3A 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |