| BONNET ATTACHMENT METHOD | THREADED |
| BONNET TYPE | INSIDE SCREW |
| CONNECTION STYLE | FLARED (TUBE) 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, FLARE(TUBE) 1ST END |
| FEATURES PROVIDED | VALVE STEM LOCK SHIELD AND BONNET PACKING |
| FLOW CONTROL DEVICE | NEEDLE |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.000 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.000 INCHES 2ND END |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| NOMINAL THREAD SIZE | 1.312 INCHES 2ND END |
| MATERIAL | STEEL BODY |
| MATERIAL | STEEL SEAT |
| MATERIAL | STEEL CORROSION RESISTING FLOW CONTROL DEVICE |
| MATERIAL | STEEL CORROSION RESISTING STEM |
| MAXIMUM OPERATING PRESSURE | 10000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | 150.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY PACS ACLH AND ACMP |
| THREAD CLASS | 2A 1ST END |
| THREAD CLASS | 2A 2ND END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 12 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD SERIES DESIGNATOR | UN 2ND END |
| VALVE OPERATION METHOD | MANUAL |
| STYLE DESIGNATOR | STRAIGHT THRU |