| APERTURE DIAMETER | 0.025 INCHES MINIMUM AND 0.052 INCHES MAXIMUM |
| CONNECTION STYLE | FLARED (TUBE) 1ST END |
| CONNECTION STYLE | FLARED (TUBE) 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| DISK LOADING METHOD | SPRING |
| FACE TO FACE DISTANCE | 1.960 INCHES |
| FLOW CONTROL DEVICE | POPPET |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | ALUMINUM ALLOY 2024 BODY |
| MATERIAL | STEEL COMP 303 FLOW CONTROL DEVICE |
| MAXIMUM OPERATING PRESSURE | 35.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | OIL, HYDRAULIC SINGLE RESPONSE |
| MOUNTING FACILITY | BRACKET |
| MOUNTING POSITION | HORIZONTAL OR VERTICAL |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.562 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| RENEWABLE SEAT RING TYPE | THREADED |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIAL FEATURES | VALVE OPERATION METHOD: HYDRAULIC |
| STYLE DESIGNATOR | STRAIGHT THRU |
| THREAD CLASS | 3A 2ND END |
| THREAD CLASS | 3A 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 16 1ST END |
| THREAD QUANTITY PER INCH | 18 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |