|
|
|
National Stock Number:
4820-00-541-0367
Federal Supply Class:
4820
National Item Identification Number:
005410367
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 803 | 75144 | JENKINS BROS | | MILV1187 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | UNION | | BONNET TYPE | INSIDE SCREW | | CONNECTION TYPE | THREADED INTERNAL PIPE ALL ENDS | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) ALL ENDS | | FLOW CONTROL DEVICE | DISK | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTMA276 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-390,ALLOYD4/D/ FED SPEC SINGLE MATERIAL RESPONSE BODY | | MATERIAL | COPPER ALLOY SEAT | | MATERIAL | COPPER ALLOY STEM | | MATERIAL | COPPER ALLOY 922 BODY | | MATERIAL | STEEL FLOW CONTROL DEVICE | | MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 425.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER, FRESH 3RD RESPONSE | | MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE | | MEDIA FOR WHICH DESIGNED | STEAM 2ND RESPONSE | | NOMINAL THREAD SIZE | 1.250 INCHES ALL ENDS | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND B COMPOSITION | | RENEWABLE SEAT RING TYPE | THREADED | | SPECIAL FEATURES | VALVE SIZE 1.250 IN. | | STYLE DESIGNATOR | ANGLE | | TEST DATA DOCUMENT | 81349-MIL-V-1187 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | NPT ALL ENDS | | VALVE OPERATION METHOD | MANUAL |
|
|