| CONNECTION TYPE | THREADED EXTERNAL BOSS 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION STYLE | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| CONNECTION STYLE | FLARED (TUBE) 1ST END |
| DISK LOADING METHOD | SPRING |
| FLOW CONTROL DEVICE | DISK |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-225/6,ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | ALUMINUM ALLOY 2024 BODY |
| MATERIAL | ALUMINUM ALLOY 2024 FLOW CONTROL DEVICE |
| MATERIAL | RUBBER SYNTHETIC SEAT |
| MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | -65.0 FAHRENHEIT 1ST RESPONSE |
| MAXIMUM OPERATING TEMP | 160.0 FAHRENHEIT 2ND RESPONSE |
| MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON 2ND RESPONSE |
| MOUNTING POSITION | HORIZONTAL OR VERTICAL |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.250 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.750 INCHES 2ND END |
| NOMINAL THREAD SIZE | 1.625 INCHES 1ST END |
| NOMINAL THREAD SIZE | 2.250 INCHES 2ND END |
| RENEWABLE SEAT RING TYPE | PRESSED-IN |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| STYLE DESIGNATOR | STRAIGHT THRU |
| SURFACE TREATMENT | ANODIZE |
| THREAD CLASS | 3A 1ST END |
| THREAD CLASS | 3A 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD SERIES DESIGNATOR | UN 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD QUANTITY PER INCH | 12 2ND END |
| VALVE OPERATION METHOD | AUTOMATIC |