| ADJUSTABLE PRESSURE RANGE | +696.0 TO 760.0 POUNDS PER SQUARE INCH |
| BOLT CIRCLE NOMINAL DIAMETER | 5.875 INCHES 2ND END |
| BOLT CIRCLE NOMINAL DIAMETER | 7.250 INCHES 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 0.875 INCHES 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 0.875 INCHES 2ND END |
| BOLT HOLE QUANTITY | 8 1ST END |
| BOLT HOLE QUANTITY | 8 2ND END |
| BONNET TYPE | EXPOSED SPRING |
| BONNET ATTACHMENT METHOD | BOLTED |
| CONNECTION TYPE | FLANGE 2ND END |
| CONNECTION TYPE | FLANGE 1ST END |
| DISK LOADING METHOD | SPRING |
| FEATURES PROVIDED | PRESSURE TIGHT OUTLET SIDE |
| FLANGE FACE DESIGN | RAISED STRAIGHT 1ST END |
| FLANGE FACE DESIGN | PLAIN 2ND END |
| FLANGE SHAPE | ROUND WITH HOLES 1ST END |
| FLANGE SHAPE | ROUND WITH HOLES 2ND END |
| FLOW CONTROL DEVICE | DISK |
| NOMINAL OUTSIDE DIAMETER | 7.500 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER | 9.000 INCHES 1ST END |
| NOMINAL THICKNESS | 1.125 INCHES 2ND END |
| NOMINAL THICKNESS | 1.125 INCHES 1ST END |
| OPENING PRESSURE SETTING | 705.0 POUNDS PER SQUARE INCH |
| RAISED FACE NOMINAL DIAMETER | 5.500 INCHES 1ST END |
| RAISED FACE NOMINAL HEIGHT | 0.062 INCHES 1ST END |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | ASE REQUIREMENT AND AS MODIFIED BY CROSBY VALVE AND GAGE CO DRAWING H42340 SH 4 |
| RENEWABLE SEAT RING TYPE | THREADED |
| SPECIAL FEATURES | THE END CONNECTION IDENTIFIED ABOVE AS THE SECOND END IS THE VALVE INLET |
| STYLE DESIGNATOR | ANGLE |
| VALVE DISCHARGE FLOW RATE | 32000.0 POUNDS PER HOUR |
| VALVE OPERATION METHOD | AUTOMATIC OR MANUAL |