| BOLT CIRCLE NOMINAL DIAMETER | 5.875 INCHES 1ST END |
| BOLT CIRCLE NOMINAL DIAMETER | 7.250 INCHES 2ND END |
| BOLT HOLE NOMINAL DIAMETER | 0.875 INCHES 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 0.875 INCHES 2ND END |
| BOLT HOLE QUANTITY | 8 1ST END |
| BOLT HOLE QUANTITY | 8 2ND END |
| BONNET TYPE | EXPOSED SPRING |
| BONNET ATTACHMENT METHOD | BOLTED |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| DISK LOADING METHOD | SPRING |
| FEATURES PROVIDED | PRESSURE TIGHT OUTLET SIDE |
| FLANGE FACE DESIGN | RECESSED STRAIGHT 1ST END |
| FLANGE FACE DESIGN | RAISED STRAIGHT 2ND END |
| FLANGE SHAPE | ROUND WITH HOLES 1ST END |
| FLANGE SHAPE | ROUND WITH HOLES 2ND END |
| FLOW CONTROL DEVICE | DISK |
| NOMINAL OUTSIDE DIAMETER | 7.500 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER | 9.000 INCHES 2ND END |
| NOMINAL THICKNESS | 1.188 INCHES 2ND END |
| NOMINAL THICKNESS | 1.250 INCHES 1ST END |
| OPENING PRESSURE SETTING | 710.0 POUNDS PER SQUARE INCH |
| RAISED FACE NOMINAL DIAMETER | 5.500 INCHES 2ND END |
| RAISED FACE NOMINAL HEIGHT | 0.062 INCHES 2ND END |
| RECESS NOMINAL DEPTH | 0.062 INCHES 1ST END |
| RECESS NOMINAL DIAMETER | 6.875 INCHES 1ST END |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY THE VALVE DISCHARGE FLOW RATE REQUIREMENT |
| RENEWABLE SEAT RING TYPE | THREADED |
| SPECIAL FEATURES | ITEMS ARE BEING CODED AS CRITICAL TO INSURE SOURCE INSPECTION WILL BE PERFORMED AT THE POINT OF MANUFACTURE, PRIOR TO MATERIAL RECEIPT BY THE US NAVY OR OTHER DOD COMPONENTS. THESE ITEMS ARE PIECE PARTS OR END ITEMS IN SUPPORT OF VITAL MILITARY HARDWARE NECESSARY TO SUSTAIN THE SUCCESSFUL MISSION OF THE SHIPS, SUBMARINES, AND SHORE STATIONS OF THE US NAVY. CRITICAL FEATURES INCLUDING, BUT NOT LIMITED TO, DIMENSIONS, TOLERANCES/CLEARANCES, ELECTRONIC CHARACTERISTICS, AND METALLURGICAL PROPERTIES WILL BESPECIFIED FOR GOVERNMENT Q AR (QUALITY ASSURANCE REPRESENTATIVES) TO INSURE THE HIGHEST POSSIBLE DEGREE OF QUALITY AND RELIABILITY OF THESE PARTS BEING DELIVERED UNDER NAVICP CONTRACTS |
| STYLE DESIGNATOR | ANGLE FLANGED ENDS |
| VALVE DISCHARGE FLOW RATE | 43200.0 POUNDS PER HOUR |
| VALVE OPERATION METHOD | AUTOMATIC OR MANUAL |
| VALVE SIZE | 2.500 INCHES |