|
|
|
National Stock Number:
4820-00-145-7360
Federal Supply Class:
4820
National Item Identification Number:
001457360
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 2177525-C121 AF | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 2177525-C121 AFL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 803-2177525-C121AF | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 803-2177525-C121AFL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 803-2177525-C1B1AF | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 803-2177525-C1B1AFL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 803-2177525C121 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 803-2177525C121L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | BOLTED | | BONNET TYPE | OUTSIDE SCREW-YOKE | | CONNECTION STYLE | SOCKET 1ST END | | CONNECTION TYPE | UNTHREADED INTERNAL PIPE 1ST END | | CRITICALITY CODE JUSTIFICATION | ZZZY | | FEATURES PROVIDED | BONNET PACKING | | FLOW CONTROL DEVICE | DISK | | MATERIAL | STEEL COMP 1010 BODY | | MATERIAL | STEEL COMP 1010 AND STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | MATERIAL | STEEL CORROSION RESISTING SEAT | | MATERIAL | STEEL STEM | | MAXIMUM OPERATING PRESSURE | 900.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | NOMINAL PIPE SIZE ACCOMMODATED | 0.250 INCHES 1ST END | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS | | VALVE OPERATION METHOD | MANUAL | | STYLE DESIGNATOR | ANGLE | | TEST DATA DOCUMENT | 80064-810-2177525 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|