|
|
|
National Stock Number:
4820-00-137-9203
Federal Supply Class:
4820
National Item Identification Number:
001379203
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| B13-3074P-05TS | 57574 | VELAN VALVE CORP. | | CS4820-0015ECFTPRQB | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | CS4820-0015ECFTPRQB | 85130 | FLOWSERVE CORPORATION DIV FLOWSERVE US INC | | D20276 | 85130 | FLOWSERVE CORPORATION DIV FLOWSERVE US INC | | MIL-DTL-22052 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-V-22052 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BONNET TYPE | OUTSIDE SCREW-YOKE | | BONNET ATTACHMENT METHOD | PRESSURE SEAL, RING TYPE | | CONNECTION STYLE | BEVELED (PIPE) ALL ENDS | | CONNECTION TYPE | BUTT WELD PIPE ALL ENDS | | FEATURES PROVIDED | BONNET PACKING | | FLOW CONTROL DEVICE | DISK | | MATERIAL DOCUMENT AND CLASSIFICATION | A182,GRADE F11 ASSN STD SINGLE MATERIAL RESPONSE BODY | | MATERIAL | COBALT ALLOY SEAT | | MATERIAL | COBALT ALLOY FLOW CONTROL DEVICE | | MATERIAL | STEEL BODY | | MATERIAL | STEEL CORROSION RESISTING STEM | | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 975.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | STEAM SINGLE RESPONSE | | NOMINAL PIPE SIZE ACCOMMODATED | 5.000 INCHES ALL ENDS | | NONDEFINITIVE SPEC/STD DATA | B COMPOSITION | | SPECIAL FEATURES | VALVE SIZE 5.000 IN. | | VALVE OPERATION METHOD | MANUAL | | STYLE DESIGNATOR | ANGLE | | TEST DATA DOCUMENT | 81349-MIL-S-901 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|