| BOLT HOLE QUANTITY | 14 |
| BONNET ATTACHMENT METHOD | BOLTED |
| BONNET TYPE | OUTSIDE SCREW-YOKE |
| CONNECTION TYPE | FLANGE, ROUND W/HOLES |
| CURRENT RATING IN AMPS | 10.0 |
| FURNISHED ITEMS AND QUANTITY | 1 HANDWHEEL |
| FACE TO FACE DISTANCE | 9.500 INCHES |
| FEATURES PROVIDED | BONNET PACKING |
| FLANGE FACE DESIGN | PLAIN |
| FLANGE DIAMETER | 12.375 INCHES |
| MATERIAL DOCUMENT AND CLASSIFICATION | UNS C92200 NATIONAL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | UNS C95800 NATIONAL SPEC SINGLE MATERIAL RESPONSE DISK |
| MATERIAL DOCUMENT AND CLASSIFICATION | UNS C95800 NATIONAL SPEC SINGLE MATERIAL RESPONSE SEAT |
| MATERIAL DOCUMENT AND CLASSIFICATION | UNS C95800 NATIONAL SPEC SINGLE MATERIAL RESPONSE STEM |
| MAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED | 300.0 POUNDS PER SQUARE INCH WATER-OIL-GAS |
| III MATERIAL | COPPER ALLOY BODY |
| III MATERIAL | COPPER ALLOY DISK |
| III MATERIAL | COPPER ALLOY SEAT |
| III MATERIAL | COPPER ALLOY STEM |
| INLET RELATIONSHIP WITH OUTLET | IDENTICAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | MSM ACTUATED GATE VALVE ASSEMBLY |
| PROPRIETARY CHARACTERISTICS | PACS |
| NONDEFINITIVE SPEC/STD DATA | I, CL2 TYPE |
| SPECIAL FEATURES | MOTOR IAW MIL-M-17059 AND MIL-M-17060; FLANGES IAW MIL-F-20042; BOLT HOLES: 10 DRILLED, 4 TAPPED; STYLE V A; SIMILAR TO 4810-01-533-9209 WHICH IS STYLE VI A AND DOES NOT HAVE THE 9" ANGLE DRIVE ASSEMBLY |
| SPECIFICATION/STANDARD DATA | MIL-V-1189 GOVERNMENT SPECIFICATION |
| VALVE OPERATION METHOD | ELECTRIC MOTOR OR MANUAL WITH GEAR UNIT |
| VALVE SIZE | 8.000 INCHES |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 250.0 AC |
| STEM TYPE | RISING |
| TEST DATA DOCUMENT | 81349-MIL-S-901C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MIL-STD-167-1, TYI AND TY II STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |