|
|
|
National Stock Number:
4810-01-520-8247
Federal Supply Class:
4810
National Item Identification Number:
015208247
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 35706N | 35795 | LESLIE CONTROLS, INC. | | MIL-V-18030 TY 1 COMP D | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | Y101636825 | 35795 | LESLIE CONTROLS, INC. | | Y101636825/CD35706N | 35795 | LESLIE CONTROLS, INC. |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 ALL ENDS | | BONNET ATTACHMENT METHOD | BOLTED | | BONNET TYPE | OUTSIDE SCREW-YOKE | | CONNECTION TYPE | FLANGE ALL ENDS | | FACE TO FACE DISTANCE | 12.500 INCHES | | FEATURES PROVIDED | PRESSURE TIGHT OUTLET SIDE AND BONNET PACKING | | FLANGE FACE DESIGN | PLAIN ALL ENDS | | FLANGE SHAPE | ROUND WITH HOLES ALL ENDS | | FLOW CONTROL DEVICE | DISK | | PART NAME ASSIGNED BY CONTROLLING AGENCY | 3" DLNS-2 DIAPHRAGM CONTROL VALVE WITH 55 ACTUATOR & HOD & 760E | | MATERIAL | STEEL BODY | | MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 575.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | STEAM SINGLE RESPONSE | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND D COMPOSITION | | RENEWABLE SEAT RING TYPE | THREADED | | SPECIAL FEATURES | THIS VALVE HAS ACTUATOR MODEL 55 (DIRECT ACTING/ALUMINUM YOKE) WITH A MODIFIED SIEMENS/MOORE 760E VALVE POSITIONER AND MOUNTING BRACKET PER NAVSEA DRAWING 89256-445-7171. | | VALVE OPERATION METHOD | HYDRAULIC | | VALVE SIZE | 3.000 INCHES | | SPECIFICATION/STANDARD DATA | 81349 - MIL-V-18030 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | STRAIGHT THRU FLANGED ENDS | | TEST DATA DOCUMENT | MIL-S-901C, EQUIP CLASS 1, MOUNTING FIXTURE 9-1, 9-2 AND 10-1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|