|
|
|
National Stock Number:
4810-01-064-1951
Federal Supply Class:
4810
National Item Identification Number:
010641951
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| A455-B1802 | 28953 | RIX INDUSTRIES |
|
Techincal Specification:
| APERTURE DIAMETER | 0.125 INCHES NOMINAL | | CONNECTION STYLE | FLARELESS (TUBE) 2ND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE(TUBE) 1ST END | | CURRENT RATING IN AMPS | 0.080 | | FURNISHED ITEMS AND QUANTITY | 1 NUT AND 1 FERRULE | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | FLOW CONTROL DEVICE | PISTON | | FREQUENCY IN HERTZ | 60.0 | | MATERIAL | COPPER ALLOY OVERALL | | MAXIMUM OPERATING PRESSURE | 135.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE | | MOUNTING POSITION | HORIZONTAL | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.750 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.562 INCHES 2ND END | | NOMINAL THREAD SIZE | 1.125 INCHES 1ST END | | PHASE | SINGLE | | SEAT ANGLE | 12.0 DEGREES 2ND END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD CLASS | 2A 2ND END | | THREAD CLASS | 2B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD SERIES DESIGNATOR | UN 1ST END | | THREAD SERIES DESIGNATOR | UNF 2ND END | | THREAD QUANTITY PER INCH | 16 1ST END |
|
|