|
|
|
National Stock Number:
4810-01-041-4856
Federal Supply Class:
4810
National Item Identification Number:
010414856
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| V27200-554 | 96487 | VALCOR ENGINEERING CORPORATION |
|
Techincal Specification:
| CONNECTION STYLE | FLARED (TUBE) 1ST END | | CONNECTION STYLE | GASKET SEAL(BOSS) 2ND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION TYPE | THREADED INTERNAL BOSS 2ND END | | CURRENT RATING IN AMPS | 0.910 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | FLOW CONTROL DEVICE | DISK | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MAXIMUM OPERATING PRESSURE | 350.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 160.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER, FRESH SINGLE RESPONSE | | MOUNTING POSITION | HORIZONTAL OR VERTICAL | | NOMINAL THREAD SIZE | 0.4375 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.4375 INCHES 2ND END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 18.0 DC AND 30.0 DC | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD CLASS | 3A 1ST END | | THREAD CLASS | 3B 2ND END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | THREAD SERIES DESIGNATOR | UNJF 2ND END |
|
|