|
|
|
National Stock Number:
4810-00-997-6106
Federal Supply Class:
4810
National Item Identification Number:
009976106
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 70248 | 93781 | PARKER-HANNIFIN CORP | | 76E4-5232 | 10855 | CARRIER CORP | | TS3 | 93781 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| CONNECTION STYLE | SOCKET (TUBE) ALL ENDS | | CONNECTION TYPE | UNTHREADED INTERNAL TUBE ALL ENDS | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | FLOW CONTROL DEVICE | DISK | | INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL | 300.0 POUNDS PER SQUARE INCH NOMINAL | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAT | | MATERIAL | STEEL BODY | | MATERIAL | STEEL FLOW CONTROL DEVICE | | MOUNTING POSITION | HORIZONTAL | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES ALL ENDS | | RENEWABLE SEAT RING TYPE | PRESSED-IN | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 DC | | STYLE DESIGNATOR | STRAIGHT THRU | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-325,TYPE2 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ZINC | | TEST DATA DOCUMENT | 81349-MIL-3-5272 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|