|
|
|
National Stock Number:
4810-00-793-0536
Federal Supply Class:
4810
National Item Identification Number:
007930536
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| EA1178 | 72139 | HUCK INTERNATIONAL, INC. |
|
Techincal Specification:
| BOLT HOLE NOMINAL DIAMETER | 0.204 INCHES 1ST END | | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.620 INCHES 1ST END | | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.750 INCHES 1ST END | | CONNECTION TYPE | FLANGE 1ST END | | CURRENT RATING IN AMPS | 20.000 | | FLANGE SHAPE | RECTANGULAR WITH HOLES 1ST END | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | FLOW CONTROL DEVICE | CONE | | MAXIMUM OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE | | NOMINAL LENGTH | 2.156 INCHES 1ST END | | NOMINAL WIDTH | 1.270 INCHES 1ST END | | SPECIAL FEATURES | TWO 0.125 IN. DIA PORTS IN SINGLE FLANGE CONNECTION | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 32.0 DC |
|
|