| CONNECTION STYLE | GASKET SEAL(BOSS) 1ST END |
| CONNECTION STYLE | GASKET SEAL(BOSS) 2ND END |
| CONNECTION TYPE | THREADED INTERNAL BOSS 1ST END |
| CONNECTION TYPE | THREADED INTERNAL BOSS 2ND END |
| CURRENT RATING IN AMPS | 0.750 |
| FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN |
| FLOW CONTROL DEVICE | BALL |
| INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL | 3400.0 POUNDS PER SQUARE INCH NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MAXIMUM OPERATING TEMP | 275.0 FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | OIL, HYDRAULIC SINGLE RESPONSE |
| MOUNTING POSITION | HORIZONTAL OR VERTICAL |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BYTHE SOURCE CONTROL DWG NO |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | LACQUER |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| THREAD QUANTITY PER INCH | 20 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |
| VALVE OPERATION METHOD | SOLENOID |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 14.0 DC AND 30.0 DC |