|
|
|
National Stock Number:
4810-00-528-2555
Federal Supply Class:
4810
National Item Identification Number:
005282555
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 111445 | 79318 | MEGGITT NORTH HOLLYWOOD INC | | 5732-1 | 92003 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS | | 695053 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| APERTURE DIAMETER | 0.375 INCHES NOMINAL | | CONNECTION TYPE | THREADED INTERNAL BOSS 1ST END | | CONNECTION STYLE | GASKET SEAL(BOSS) 1ST END | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN | | FLOW CONTROL DEVICE | PISTON | | MATERIAL | ALUMINUM ALLOY BODY | | MATERIAL | ALUMINUM ALLOY SEAT | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM OPERATING PRESSURE | 60.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE | | MOUNTING POSITION | HORIZONTAL | | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END | | VALVE OPERATION METHOD | AUTOMATIC | | VOLTAGE IN VOLTS AND CURRENT TYPE | 18.0 DC AND 30.0 DC | | STYLE DESIGNATOR | STRAIGHT THRU | | SURFACE TREATMENT | ANODIZE | | TEST DATA DOCUMENT | 36659-695053 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD QUANTITY PER INCH | 18 1ST END | | THREAD SERIES DESIGNATOR | UNJF 1ST END |
|
|