| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 0.970 INCHES NOMINAL |
| BODY STYLE | PLAIN |
| CONCENTRIC HOLE DEPTH | 1.159 INCHES NOMINAL |
| CONCENTRIC HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| FIRST DIAMETER FROM WRENCHING FEATURE | 0.485 INCHES MINIMUM AND 0.495 INCHES MAXIMUM |
| FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| FIRST END NOMINAL THREAD SIZE | 0.625 INCHES |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END THREAD CLASS | 2A |
| FIRST END THREAD LENGTH | 0.550 INCHES NOMINAL |
| FIRST END THREAD SERIES DESIGNATOR | UNC |
| FIRST END THREAD QUANTITY PER INCH | 11 |
| FIRST END SEAT ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END STYLE DESIGNATOR | INVERTED FLARE |
| FIRST RADIAL FLUID HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | DD/TS/0107/86 GROUP 1(D) MFR REF SINGLE MATERIAL RESPONSE OR DD/TS/0107/86 GROUP 1(E) MFR REF SINGLE MATERIAL RESPONSE |
| III MATERIAL | STEEL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PLUG |
| OVERALL LENGTH | 1.170 INCHES MINIMUM AND 1.210 INCHES MAXIMUM |
| SPECIAL FEATURES | HD SQ W/RD CORNERS,1.12 IN. HD DIA;0.030/0.060 IN. MIN/MAX X 45 DEG CHAMFER THD END |
| WIDTH ACROSS FLATS | 0.929 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| WRENCHING FEATURE HEIGHT | 0.420 INCHES NOMINAL |
| WRENCHING FEATURE STYLE | SQUARE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DD/TS/0107/86 GROUP 1004(A) MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PHOSPHATE |