|
|
|
National Stock Number:
4730-01-562-4643
Federal Supply Class:
4730
National Item Identification Number:
015624643
Description:
ELBOW,TUBE TO BOSS
Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
|
Manufacturer Information:
| J12LGE | 79926 | SSP FITTINGS CORP |
|
Techincal Specification:
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | FURNISHED ITEMS AND QUANTITY | 1 LOCKNUT AND 1 PREFORMED PACKING | | FLOW ANGLE | 90.0 DEGREES | | LEG LENGTH | 3.340 INCHES NOMINAL 2ND END | | LEG LENGTH | 1.660 INCHES NOMINAL 1ST END | | MATERIAL | STEEL CORROSION RESISTING BODY | | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.750 INCHES 1ST END | | NOMINAL THREAD SIZE | 1.062 INCHES ALL ENDS | | SEAT ANGLE | 37.0 DEGREES 1ST END | | SPECIAL FEATURES | MATERIAL 316 STAINLESS STEEL; 2ND END HAS LOCKNUT AND ORING | | THREAD QUANTITY PER INCH | 12 ALL ENDS | | THREAD SERIES DESIGNATOR | UN ALL ENDS |
|
|