4720-01-161-1246 TUBING,NONMETALLIC Index 4730-01-161-1248 FITTING,LUBRICATION

National Stock Number:
4730-01-161-1247

Federal Supply Class:
4730

National Item Identification Number:
011611247

Description:
BOLT,FLUID PASSAGE

Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.


Manufacturer Information:
42312E28782402TRIUMPH GEAR SYSTEMS INC


Techincal Specification:
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
CONCENTRIC HOLE DEPTH2.250 INCHES MINIMUM AND 2.310 INCHES MAXIMUM
CONCENTRIC HOLE DIAMETER0.168 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
FIRST DIAMETER FROM WRENCHING FEATURE0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
FIRST RADIAL FLUID HOLE DIAMETER0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
FOURTH DIAMETER FROM WRENCHING FEATURE0.418 INCHES MINIMUM AND 0.420 INCHES MAXIMUM
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END1.636 INCHES MINIMUM AND 1.669 INCHES MAXIMUM
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER0.347 INCHES MINIMUM AND 0.352 INCHES MAXIMUM
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER1.003 INCHES MINIMUM AND 1.023 INCHES MAXIMUM
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER1.107 INCHES MINIMUM AND 1.117 INCHES MAXIMUM
OVERALL LENGTH2.411 INCHES MINIMUM AND 2.494 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 COND A FED SPEC ALL MATERIAL RESPONSES
MATERIALSTEEL COMP 316 OR STEEL COMP 347
SECOND DIAMETER FROM WRENCHING FEATURE0.418 INCHES MINIMUM AND 0.420 INCHES MAXIMUM
WIDTH ACROSS FLATS0.739 INCHES MINIMUM AND 0.753 INCHES MAXIMUM
WRENCHING FEATURE HEIGHT0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
WRENCHING FEATURE STYLEHEXAGON
SURFACE TREATMENTPASSIVATE
THIRD DIAMETER FROM WRENCHING FEATURE0.308 INCHES MINIMUM AND 0.310 INCHES MAXIMUM


Click here to Register for Free 30-day Trial