|
|
|
National Stock Number:
4730-01-040-3702
Federal Supply Class:
4730
National Item Identification Number:
010403702
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| 2-01033-8 | 00624 | EATON AEROQUIP LLC | | 2-01033-8 | 08199 | EATON AEROSPACE | | 2-01033-8 | 55581 | TAMCO INC. DBA TECHNICAL ASSISTANCE COMPANY DIV TECHNICAL ASSISTANCE COMPANY | | 2-01033-8 | 5RA73 | INTELLIWORKS HT | | AFP164-8 | 30974 | AEROFIT, LLC | | AFP64-8 | 30974 | AEROFIT, LLC | | BACS13AP | 81205 | THE BOEING COMPANY | | BACS13AP8 | 77272 | THE BOEING COMPANY | | BC922-8 | 50948 | PARKER HANNIFIN CORP STRATOFLEX DIV AIRCRAFT FITTINGS OPN | | DB0S13AP-8 | 14798 | DESIGNED METAL CONNECTIONS INC |
|
Techincal Specification:
| FLANGE WIDTH | 0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.500 INCHES NOMINAL | | MATERIAL | STEEL COMP 1213 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 0.750 INCHES NOMINAL | | SEAT ANGLE IN DEG | 35.0 | | SLEEVE OUTSIDE DIAMETER | 0.585 INCHES MINIMUM AND 0.589 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 81205-BACS13AP MANUFACTURERS SPECIFICATION | | STYLE DESIGNATOR | FLARELESS | | SURFACE TREATMENT | CADMIUM OR CADMIUM AND CHROMATE | | CASEHARDENING INDICATOR | CASEHARDENED | | FLANGE OUTSIDE DIAMETER | 0.625 INCHES NOMINAL |
|