|
|
|
National Stock Number:
4730-00-834-0661
Federal Supply Class:
4730
National Item Identification Number:
008340661
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| 2 080115BC | 0U583 | SAE INTERNATIONAL | | 2 080115BC | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | 7165-2 | 79470 | DANA CORP WEATHERHEAD DIV | | 7165X2 | 01276 | EATON-AEROQUIP INC DIV FLUID CONNECTORS PRODUCTS | | 7165X2 | 79470 | DANA CORP WEATHERHEAD DIV | | J514 | 0U583 | SAE INTERNATIONAL | | J514 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | SAE J514 2 080115BC | 0U583 | SAE INTERNATIONAL | | SAE-J514 | 0U583 | SAE INTERNATIONAL |
|
Techincal Specification:
| CASEHARDENING INDICATOR | NOT CASEHARDENED | | FLANGE OUTSIDE DIAMETER | 0.198 INCHES MINIMUM AND 0.203 INCHES MAXIMUM | | FLANGE WIDTH | 2.000 INCHES NOMINAL | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.125 INCHES NOMINAL | | OVERALL LENGTH | 0.275 INCHES MINIMUM AND 0.281 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1212 | | NONDEFINITIVE SPEC/STD DATA | 29 FIGURE | | SEAT ANGLE IN DEG | 40.0 | | SLEEVE OUTSIDE DIAMETER | 0.178 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 81343-J514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | STYLE DESIGNATOR | FLARELESS |
|
|