| DISTANCE FROM BOLT END TO HOLE CENTER | 0.170 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE TO FLAT | 0.688 INCHES NOMINAL |
| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 3.000 INCHES NOMINAL |
| BODY STYLE | SHOULDER |
| CONCENTRIC HOLE DEPTH | 6.125 INCHES NOMINAL |
| CONCENTRIC HOLE DIAMETER | 0.374 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| COTTER PIN HOLE DIAMETER | 0.105 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| FIRST DIAMETER FROM WRENCHING FEATURE | 0.992 INCHES MINIMUM AND 0.995 INCHES MAXIMUM |
| FIRST END CONNECTION TYPE | THREADED EXTERNAL BOSS |
| FIRST END NOMINAL THREAD SIZE | 0.750 INCHES |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END THREAD CLASS | 3A |
| FIRST END THREAD LENGTH | 0.935 INCHES NOMINAL |
| FIRST END THREAD SERIES DESIGNATOR | UNF |
| FIRST END THREAD QUANTITY PER INCH | 16 |
| FIRST END STYLE DESIGNATOR | EXTERNAL SEAT FOR GASKET SEAL (BOSS) |
| FIRST RADIAL FLUID HOLE DIAMETER | 0.377 INCHES NOMINAL |
| HEAD DIAMETER | 1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 6.015 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 6.300 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 6.950 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COND C MIL SPEC SINGLE MATERIAL RESPONSE |
| III MATERIAL | STEEL COMP 4340 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MINIMUM TENSILE STRENGTH | 190000 POUNDS PER SQUARE INCH |
| OVERALL LENGTH | 7.280 INCHES NOMINAL |
| SECOND DIAMETER FROM WRENCHING FEATURE | 0.800 INCHES NOMINAL |
| WRENCHING FEATURE HEIGHT | 0.330 INCHES NOMINAL |
| WRENCHING FEATURE STYLE | ROUND WITH WRENCH FLATS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 496,TYPE 2,FSC-36659 MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMIUM |