4730-00-800-3139 SLEEVE,CLINCH,TUBE FITTING Index 5330-00-800-3143 GASKET

National Stock Number:
4730-00-800-3140

Federal Supply Class:
4730

National Item Identification Number:
008003140

Description:
SLEEVE,CLINCH,TUBE FITTING

Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.


Manufacturer Information:
24-080115AC-PH081343SOCIETY OF AUTOMOTIVE ENGINEERS INC
24-080115AC-PH0S81343SOCIETY OF AUTOMOTIVE ENGINEERS INC
24-080115AC-PHOS0U583SAE INTERNATIONAL
24-080115AC-PHOS81343SOCIETY OF AUTOMOTIVE ENGINEERS INC
24TU-S30780PARKER-HANNIFIN CORPORATION
24TU-S98441PARKER HANNIFIN CORP
J5140U583SAE INTERNATIONAL
J51481343SOCIETY OF AUTOMOTIVE ENGINEERS INC
MIL-DTL-1886681349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS51825-12P00624EATON AEROQUIP LLC
MS51825-12P13174PARKER HANNIFIN CORP HOSE PRODUCTS DIV
MS51825-12P22031AIR-WAY MANUFACTURING COMPANY
MS51825-12P30327IMPERIAL
MS51825-12P79470DANA CORP WEATHERHEAD DIV
MS51825-12P93188L AND L MFG CO
MS51825-12P96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS51825-12P98660LUBE DEVICES INC FLODAR FLUID POWER FITTINGS DIV


Techincal Specification:
CASEHARDENING INDICATORCASEHARDENED
FLANGE OUTSIDE DIAMETER1.694 INCHES MINIMUM AND 1.699 INCHES MAXIMUM
FLANGE WIDTH0.119 INCHES NOMINAL
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.500 INCHES NOMINAL
OVERALL LENGTH0.475 INCHES MINIMUM AND 0.478 INCHES MAXIMUM
MATERIALSTEEL
METALLIC HARDNESS RATING99.5 NOMINAL ROCKWELL B
NONDEFINITIVE SPEC/STD DATA28 FIGURE
SEAT ANGLE IN DEG40.0
SLEEVE OUTSIDE DIAMETER1.587 INCHES MINIMUM AND 1.590 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA96906-MS51825 GOVERNMENT STANDARD AND 81343-J514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATORFLARELESS
SURFACE TREATMENTPHOSPHATE


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us