|
|
|
National Stock Number:
4730-00-800-3121
Federal Supply Class:
4730
National Item Identification Number:
008003121
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| 20TUSS | 30780 | PARKER-HANNIFIN CORPORATION | | 20TUSS | 98441 | PARKER HANNIFIN CORP | | FIG22STYLEA | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-18866 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILF21467 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS51825-11SSA | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CASEHARDENING INDICATOR | NOT CASEHARDENED | | FLANGE OUTSIDE DIAMETER | 1.446 INCHES NOMINAL | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 1.250 INCHES NOMINAL | | OVERALL LENGTH | 0.475 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | METALLIC HARDNESS RATING | 70.0 MINIMUM ROCKWELL B AND 95.0 MAXIMUM ROCKWELL B | | NONDEFINITIVE SPEC/STD DATA | 22 FIGURE AND A STYLE | | SEAT ANGLE IN DEG | 40.000 | | SLEEVE OUTSIDE DIAMETER | 1.341 INCHES NOMINAL | | STYLE DESIGNATOR | FLARELESS | | SURFACE TREATMENT | PASSIVATE |
|