|
|
|
National Stock Number:
4730-00-792-5763
Federal Supply Class:
4730
National Item Identification Number:
007925763
Description:
BOLT,FLUID PASSAGE
Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 350919-7 | 1WL60 | LOCKHEED MARTIN SERVICES, LLC | | 350919-7 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 1.066 INCHES NOMINAL | | BODY STYLE | PLAIN | | CONCENTRIC HOLE DEPTH | 1.050 INCHES NOMINAL | | CONCENTRIC HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.126 INCHES MAXIMUM | | COTTER PIN HOLE DIAMETER | 0.106 INCHES NOMINAL | | DISTANCE FROM BOLT END TO HOLE CENTER | 0.120 INCHES NOMINAL | | FIRST DIAMETER FROM WRENCHING FEATURE | 0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM | | FIRST END NOMINAL THREAD SIZE | 0.375 INCHES | | FIRST END THREAD CLASS | 3A | | FIRST END THREAD DIRECTION | RIGHT-HAND | | FIRST END THREAD LENGTH | 0.391 INCHES NOMINAL | | FIRST END THREAD QUANTITY PER INCH | 24 | | FIRST END THREAD SERIES DESIGNATOR | UNJF | | FIRST RADIAL FLUID HOLE DIAMETER | 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 1.766 INCHES NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 1.375 INCHES NOMINAL | | OVERALL LENGTH | 1.954 INCHES NOMINAL | | MATERIAL | STEEL | | MINIMUM TENSILE STRENGTH | 16000 POUNDS PER SQUARE INCH | | WIDTH ACROSS FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM | | WRENCHING FEATURE HEIGHT | 0.188 INCHES NOMINAL | | WRENCHING FEATURE STYLE | HEXAGON | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM |
|
|