| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 0.781 INCHES MINIMUM AND 0.811 INCHES MAXIMUM |
| BODY STYLE | PLAIN |
| CONCENTRIC HOLE DEPTH | 0.907 INCHES MINIMUM AND 0.967 INCHES MAXIMUM |
| CONCENTRIC HOLE DIAMETER | 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM |
| FIRST DIAMETER FROM WRENCHING FEATURE | 0.434 INCHES MINIMUM AND 0.435 INCHES MAXIMUM |
| FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| FIRST END NOMINAL THREAD SIZE | 0.437 INCHES |
| FIRST END SEAT ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END STYLE DESIGNATOR | FLARED |
| FIRST END THREAD CLASS | 3A |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END THREAD LENGTH | 0.331 INCHES NOMINAL |
| FIRST END THREAD SERIES DESIGNATOR | UNF |
| FIRST END THREAD QUANTITY PER INCH | 20 |
| FIRST RADIAL FLUID HOLE DIAMETER | 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 0.776 INCHES MINIMUM AND 0.786 INCHES MAXIMUM |
| OVERALL LENGTH | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 302,303,304,316,OR 321,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| WIDTH ACROSS FLATS | 0.672 INCHES MINIMUM AND 0.704 INCHES MAXIMUM |
| WRENCHING FEATURE HEIGHT | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| WRENCHING FEATURE STYLE | HEXAGON |
| SURFACE TREATMENT | PASSIVATE |