|
|
|
National Stock Number:
4730-00-146-0333
Federal Supply Class:
4730
National Item Identification Number:
001460333
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| MIL-DTL-18866 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS51825-7 | 00624 | EATON AEROQUIP LLC | | MS51825-7 | 01276 | EATON-AEROQUIP INC DIV FLUID CONNECTORS PRODUCTS | | MS51825-7 | 13174 | PARKER HANNIFIN CORP HOSE PRODUCTS DIV | | MS51825-7 | 30327 | IMPERIAL | | MS51825-7 | 30780 | PARKER-HANNIFIN CORPORATION | | MS51825-7 | 79470 | DANA CORP WEATHERHEAD DIV | | MS51825-7 | 93061 | PARKER-HANNIFIN CORP | | MS51825-7 | 93188 | L AND L MFG CO | | MS51825-7 | 98441 | PARKER HANNIFIN CORP | | MS51825-7A | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CASEHARDENING INDICATOR | CASEHARDENED | | CRITICALITY CODE JUSTIFICATION | FEAT | | FLANGE OUTSIDE DIAMETER | 0.780 INCHES MINIMUM AND 0.785 INCHES MAXIMUM | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.625 INCHES NOMINAL | | OVERALL LENGTH | 0.442 INCHES MINIMUM AND 0.445 INCHES MAXIMUM | | MATERIAL | STEEL | | METALLIC HARDNESS RATING | 70.0 MINIMUM ROCKWELL B AND 95.0 MAXIMUM ROCKWELL B | | NONDEFINITIVE SPEC/STD DATA | 2 CLASS AND 6 TYPE | | SLEEVE OUTSIDE DIAMETER | 0.710 INCHES MINIMUM AND 0.713 INCHES MAXIMUM | | SEAT ANGLE IN DEG | 40.0 | | SPECIAL FEATURES | WEAPON SYSTEM ESSENIAL | | STYLE DESIGNATOR | FLARELESS | | SURFACE TREATMENT | CADMIUM AND CHROMATE |
|