| DISTANCE FROM CENTERLINE TO FLAT | 0.844 INCHES NOMINAL |
| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 9.000 INCHES NOMINAL |
| BODY STYLE | SHOULDER |
| CONCENTRIC HOLE DEPTH | 3.000 INCHES NOMINAL |
| CONCENTRIC HOLE DIAMETER | 0.344 INCHES NOMINAL |
| FIRST DIAMETER FROM WRENCHING FEATURE | 1.377 INCHES NOMINAL |
| FIRST END NOMINAL THREAD SIZE | 1.250 INCHES |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END THREAD CLASS | 2A |
| FIRST END THREAD LENGTH | 1.250 INCHES NOMINAL |
| FIRST END THREAD SERIES DESIGNATOR | UNF |
| FIRST END THREAD QUANTITY PER INCH | 12 |
| FIRST RADIAL FLUID HOLE DIAMETER | 0.250 INCHES NOMINAL |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM |
| HEAD DIAMETER | 2.000 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 11.500 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 10.125 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 10.250 INCHES NOMINAL |
| OVERALL LENGTH | 12.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI/SAE 4140 FED STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND DIAMETER FROM WRENCHING FEATURE | 1.000 INCHES NOMINAL |
| SECOND END CONNECTION TYPE | THREADED INTERNAL PIPE |
| SECOND END STYLE DESIGNATOR | PLAIN |
| SECOND END THREAD DIRECTION | RIGHT-HAND |
| SECOND END THREAD SERIES DESIGNATOR | NPT |
| WRENCHING FEATURE HEIGHT | 0.500 INCHES NOMINAL |
| WRENCHING FEATURE STYLE | ROUND WITH WRENCH FLATS |