|
|
|
National Stock Number:
4730-00-139-3421
Federal Supply Class:
4730
National Item Identification Number:
001393421
Description:
BOLT,FLUID PASSAGE
Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 4J63202-103B | 0A489 | LOCKHEED MARTIN AEROPARTS, INC. | | 4J63202-103B | 1FUD6 | LOCKHEED MARTIN LOGISTIC SERVICES, INC. | | 4J63202-103B | 1WL60 | LOCKHEED MARTIN SERVICES, LLC | | 4J63202-103B | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| DISTANCE FROM BOLT END TO HOLE CENTER | 0.168 INCHES NOMINAL | | DISTANCE FROM CENTERLINE TO FLAT | 0.615 INCHES NOMINAL | | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 1.930 INCHES NOMINAL | | BODY STYLE | SHOULDER | | CONCENTRIC HOLE DEPTH | 2.430 INCHES NOMINAL | | CONCENTRIC HOLE DIAMETER | 0.215 INCHES MINIMUM AND 0.222 INCHES MAXIMUM | | COTTER PIN HOLE DIAMETER | 0.139 INCHES MINIMUM AND 0.145 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | FEAT | | FIRST DIAMETER FROM WRENCHING FEATURE | 0.999 INCHES NOMINAL | | FIRST RADIAL FLUID HOLE DIAMETER | 0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM | | HEAD DIAMETER | 1.500 INCHES NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 3.202 INCHES NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 2.460 INCHES NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 2.535 INCHES NOMINAL | | OVERALL LENGTH | 3.412 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | MINIMUM TENSILE STRENGTH | 20000 POUNDS PER SQUARE INCH | | SECOND END NOMINAL THREAD SIZE | 0.250 INCHES | | SECOND END THREAD CLASS | 3B | | SECOND END THREAD LENGTH | 0.250 INCHES NOMINAL | | SECOND END THREAD DIRECTION | RIGHT-HAND | | SECOND END THREAD QUANTITY PER INCH | 28 | | SECOND END THREAD SERIES DESIGNATOR | UNF | | SPECIAL FEATURES | WEAPON SYTEM ESENTIAL | | WRENCHING FEATURE HEIGHT | 0.210 INCHES NOMINAL | | WRENCHING FEATURE STYLE | ROUND WITH WRENCH FLATS |
|
|