| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | BODY STEEL COMP 303 AND BODY STEEL COMP 304 AND BODY STEEL COMP 316 AND BODY STEEL COMP 321 ALL ENDS |
| CONNECTION TYPE | THREADED INTERNAL TUBE ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT FLARE ALL ENDS |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.173 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED POLYTETRAFLUOROETHYLENE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED TEXTILE YARN |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| OUTSIDE DIAMETER | 0.410 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 17.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID 2ND RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 1.000 INCHES |
| NOMINAL THREAD SIZE | 0.438 INCHES ALL ENDS |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | MEDIUM PRESSURE HYDRAULIC HOSE, PTFE INNER TUBE REINFORCED WITH CRES WIRE DRAID AND PROTECTED BY BLACK NYLON ABRASION RESISTANT COVER |
| SEAT ANGLE | 37.0 DEGREES ALL ENDS |
| SPECIAL MARKINGS | MARK SHALL BE IN ACCORANCE WITH SAE-AS478 |
| TEMP RATING | -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B ALL ENDS |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| THREAD SERIES DESIGNATOR | UNJF ALL ENDS |
| THREAD QUANTITY PER INCH | 20 ALL ENDS |