| END CONNECTION DESIGN | ELBOW ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | BODY ALUMINUM ALLOY 6061 ALL ENDS |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 51.0 |
| BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT FLARE ALL ENDS |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | BODY ANODIZE ALL ENDS |
| FLOW ANGLE | 90.0 DEGREES ALL ENDS |
| INSIDE DIAMETER | 0.329 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND 1ST LAYER MOLDED RUBBER, SYNTHETIC AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.375 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 25.125 INCHES NOMINAL WORKING |
| TEMP RATING | -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B ALL ENDS |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| THREAD SERIES DESIGNATOR | UNJF ALL ENDS |
| THREAD QUANTITY PER INCH | 18 ALL ENDS |