| END CONNECTION DESIGN | ELBOW ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | BODY STEEL CORROSION RESISTING ALL ENDS |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| BURST TEST PRESSURE | 6500.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT FLARE ALL ENDS |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.375 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, POLYTERAFLUORETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARE-TO-FLARE |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 9.500 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | AIR 4TH RESPONSE |
| MEDIA FOR WHICH DESIGNED | FUEL 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID 3RD RESPONSE |
| MEDIA FOR WHICH DESIGNED | OIL 2ND RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| SPECIAL FEATURES | ALSO DESIGNED FOR WATER-ALCOHOL MEDIA; REINFORCED WITH CORROSION RESISTANT STEEL WIRE BRAID |
| TEMP RATING | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE |