| PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY: HOSE ASSY 30IN |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER SHEET RUBBER |
| LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SEAT ANGLE | 37.0 DEGREES AND 45.0 DEGREES 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| MAXIMUM OPERATING PRESSURE | 5800.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| SPECIFICATION/STANDARD DATA | SAE 100R2 NATIONAL STD/SPEC |
| BURST TEST PRESSURE | 23200.0 POUNDS PER SQUARE INCH |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| MEASURING METHOD AND LENGTH | 30.000 INCHES NOMINAL WORKING |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| OUTSIDE DIAMETER | 0.590 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | AIR AND HYDRAULIC FLUID AND OIL, LUBRICATING, DIESTER BASE AND WATER SINGLE RESPONSE |