| MEASURING METHOD AND LENGTH | 21.500 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 3.500 INCHES |
| NOMINAL THREAD SIZE | 0.810 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.810 INCHES 2ND END |
| OUTSIDE DIAMETER | 0.800 INCHES NOMINAL |
| SPECIAL FEATURES | THREAD TYPE IS O-RING FACE SEAL; PARKER 471 ST HYDRAULIC HOSE, TYPE 2SC HIGH ABRASION RESISTANT COVER; OIL-RESISTANT NITRILE-BASED SYNTHETIC RUBBER TUBE; TWO HIGH-TENSILE STEEL WIRE REINFORCEMENTS; AND AN OIL-; WEATHER-, AND A HIGH ABRASION-RESISTANT SUPER TOUGH (ST) POLYMERIC COVER. |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 16 1ST END |
| THREAD CLASS | 16 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNC 1ST END |
| THREAD SERIES DESIGNATOR | UNC 2ND END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 17000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL HOSE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| CONNECTION STYLE | FLARE 1ST END |
| CONNECTION STYLE | FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, NBR8 CR 21.5 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 4250.0 POUNDS PER SQUARE INCH |