| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 23200.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL HOSE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| CONNECTION STYLE | FLARE 1ST END |
| CONNECTION STYLE | FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY 4 CR 45.5 2972 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 5800.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 45.500 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| NOMINAL THREAD SIZE | 0.440 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.440 INCHES 2ND END |
| OUTSIDE DIAMETER | 0.590 INCHES NOMINAL |
| SEAT ANGLE | 45.0 DEGREES 1ST END |
| SEAT ANGLE | 45.0 DEGREES 2ND END |
| SPECIAL FEATURES | THREAD TYPE IS 37INCH JIC; PARKER 381 HYDRAULIC HOSE; SYNTHETIC RUBBER TUBE; TWO BRAIDS OF SPECIAL HIGH TENSILE STEEL WIRE REINFORCEMENT; MSHA ACCEPTED SYNTHETIC RUBBER COVER. |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 20 1ST END |
| THREAD CLASS | 20 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNC 1ST END |
| THREAD SERIES DESIGNATOR | UNC 2ND END |