| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.101 INCHES MINIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 1.560 INCHES MINIMUM AND 1.650 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 30.050 INCHES MINIMUM OVERALL AND 30.550 INCHES MAXIMUM OVERALL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| NOMINAL THREAD SIZE | 1.625 INCHES 1ST END |
| NOMINAL THREAD SIZE | 1.625 INCHES 2ND END |
| SEAT ANGLE | 12.0 DEGREES 2ND END |
| SEAT ANGLE | 12.0 DEGREES 1ST END |
| SPECIAL FEATURES | TEMPERATURE RATING IS MAXIMUM; BURST TEST PRESSURE AT HIGH TEMPERATURE IS 9000.0 PSI. MINIMUM; CAN ALSO BE USED IN SOME PNEUMATIC SYSTEMS WHICH ALLOW SOME GASEOUS DIFFUSION THROUGH HOSE WALL |
| TEMP RATING | 275.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| THREAD SERIES DESIGNATOR | UNJ 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD QUANTITY PER INCH | 12 2ND END |